• lab-217043_1280

Heal force Tri-Gas Incubator

Temperature control

●Direct heating enables rapid temperature recovery while air jacket provides isolation against ambient temperature fluctuations

●PT1000 temperature sensor ensures stable temperature control with itte gradient and prompt temperature recovery without overheat

●Three temperature control settings (main heater, outer door heater and overheat protection) minimize condensation and yield precise temperature uniformity


Product Detail

Product Tags

Introduction

2

CO2 control

●Drift free IR CO2 sensor responds extremely fast to gas concentration changes

●Auto-zero runs automatically to recover the indicator to 'zero' every 24 hours

●HEPA filter of CO2 inlet port can remove impurities and contaminants with efficiency 99.998% @ 0.2um

●Standard CO2 cylinder auto changer alerts users and ensures continuous CO2 supply

2

O2 control

● Maintenance-free zirconuim oxide sensor: long life, good linearity and high precision

● Oxide sensor is calibrated automatically(auto-cal) and stays in the incubator during the 90°C decontamination routine

● Well designed O2/N2 inlet module impoves humidity stability in chamber

2

Constant humidity

● Larger water surface area provided by water reservoir with inclined and rounded corners

● A new water level alarm(audible and visible) alerts users when the water reservoir needs to be refilled

● Standard humidity sensor ensures a constant high level of humidity to prevent cultures from drying out

User-friendly interface

● Microprocessor with soft-touch control panel for optimum operation

● Large-size TFT-LCD display for temperature, CO2, O2 concentra- tion and RH

● Comprehensive visual and audio  alarms for all parameters

● Diagnostic interface provide comprehensive solutions to frequently encountered problems

● RS232 port standard for communication and external instrument logging

Contamination prevention

● 90°C disinfection routine decontaminates the entire interior of the chamber while causes less damage to electronic components

● In independent tests, a routine disinfection circle is proven to completely eliminate a variety of contaminants including mycoplasma

● A completely smooth inner casing with rounded corner reduces the possiblity of hidden contamination Easy-removable, replaceable shelves make chamber cleaning a rapid and efficient process

2

General Specifications

Temp. Control Method

Direct heat & air jacket

Humidity range(% RH)

≥95%±3%

Temp. Control sensor

Pt1000

Interior Volume

151 L

Temp. Range(℃)

Amb. +2 to 55℃

External Dimensions(mm)

637×768×869 (W×D×H)

Temp. Accuracy(℃)

<±0.1

Interior Dimensions(mm)

470×530×607 (W×D×H)

Recovery Time

≤7 mins(After 30 sec. Door opening)

Net Weight

80Kg

CO2 control system

Microprocessor PID

Standard Quantity of Shelves

3

CO2 range(% CO2)

0~20

Maxium Quantity of Shelves

10

CO2 accuracy(%CO2)

±0.1

Shelf Dimensions(mm)

423×445 (W×D)

CO2 sensor

IR standard or TC optional

Max. Load per Shelf(Kg)

10

O2 range(% CO2)

3%-20%, 22%-85%

Available Electrical configuration

220V±10%/ 50Hz (60Hz)

O2 accuracy(%CO2)

±0.2

Rated Power

≤650VA+10%

O2 sensor

zirconuim

Interior material

Stainless steel, type 304

7BZ-HF100-01H Specifications 7BZ-HF100-01L Specifications
CO2 sensor IR CO2 sensor IR
O2 range (%O2) 22%-85% O2 range (%O2) 3%-20%
7BZ-HF100-00T Specifications 7BZ-HF100-001 Specifications
CO2 sensor TCD CO2 sensor IR

  • Previous:
  • Next:

  • Write your message here and send it to us