New Fashion Design for Pipette Controller - Water-Jacketed CO₂ Incubator - LuoRon

Send email to us email whatsapp

Product Detail

Product Tags

Feedback (2)

High quality Very first,and Consumer Supreme is our guideline to offer the most beneficial service to our consumers.At present, we're attempting our greatest to be among the top exporters in our area to fulfill buyers far more need to have for Laboratory Pipette, Fixed Pipettor, deep well 96 well plate, We give priority to quality and customer pleasure and for this we follow stringent excellent control measures. We've got in-house testing facilities where our items are tested on every single aspect at different processing stages. Owning to latest technologies, we facilitate our clients with custom made creation facility.

New Fashion Design for Pipette Controller - Water-Jacketed CO₂ Incubator – LuoRon Detail:

HEPA filter

HF160W applies long term effectiveness of the HEPA filter to protect your cultures. The filter is very efficient to entrap particulates larger than 0.3μm at 99.97%. The HEPA filter system runs continuously and within every 60 seconds, the volume of entire chamber is disinfected. With help of HEPA filter, the air quality achieves Class 100 clean room levels within 5 minutes following a door opening.

Airflow system

Optimized air flow system ensures the temperature and CO₂ concentration to be stable and uniform within the chamber.

AUTO-ZERO/AUTO-START

HF160W combines precise CO₂ control with a choice of TC or IR sensors. The microprocessor will automatically “Zero” the incubator(IR type) using room air as a reference every 24 hours. Auto-start function for TC type ensures the sensor’s beseline automatically reset without manual adjustment. These features will maintain an accurate CO₂ control without worrying about CO2 drift.

Automatic control door heater

The outer door incorporates a door heater which is interlocked with the surrounding temperature monitoring system. This prevents temperature differences between the chamber and the inner door, thereby preventing condensation.

Humidity display and alarming system

HF160W is able to create a high humidity environment and the relative humidity (RH) is displayed on the panel, readable in 0.1% increments, including low RH programmable alarm(alerts you of need to add water)

Space Utility

Automatic gas cylinder switchover system

This system automatically switches from the primary to secondary gas cylinder when CO2 gas level does not change while an injection valve is open.

A. power switch

B. camber gas sample port

C. fill port

D. CO2 sensor

E. temperature sensor

F. humidity sensor

G. piling leg

H. mirror finish shelves

I. water jacket

J. glass fibre insulator

K. high efficiency HEPA

L. magnetic gasket

M. outer door heater

N. water pan

O. water jacket drain

P. coved corner

HF160W Specifications

*HF160W Specifications*
Construction	655×656×1030(mm) 25.8×25.8×40.5(inch)	Humidity	Humidity pan
Exterior dimensions (W×D×H)	544×504×681(mm) 21.4×19.8×26.8(inch)	Humidifying system	Standard
Interior dimensions (W×D×H)	185L/6.5cu.ft.	Humidifying sensor	≥95%
Interior Volume	43.5L/1.54cu.ft.	Relative humidity	In 0.1% increments
Water jacket volume	110kg/242lbs	Display	3L
Net Weight	Type 304, mirror finish stainless steel	Water reservior volume	“466×440(mm)18.3×17.3(inch)
Interior	cold-rolled steel, power coated	Shelves	Type 304, mirror finish, stainless steel
Exterior	one inner door standard	Shelf dimensions (W×D)	3,11
Inner door	Water Jacket	Shelf construction	Standard
Temperature	Microprocessor	Standard, Maximum	0.3μm，Efficiency:99.998% (for CO2)
Heating method	PT1000	Fittings	Standard
Temp. control system	5℃ above ambient temperature to 55℃	Access port	HEPA filter system
Temp. sensor	±0.2℃	Air filter	430W
Temp. range	±0.1℃	Remote alarm contacts	220V/50Hz (standard),
Temp. uniformity	0.1 MPa	De-contamination	110V/60Hz (Optional)
Temp. stability	Microprocessor	Rated power	Power interruption * High/low temperature *
CO2	Thermal conductivity/Infrared	Power supply	Deviation of CO2 * RH * Door ajar *
Inlet pressure	0 to 20%	Alarm system	Independent overheat protection
CO2 control system	±0.1%	Data output	RS232
CO2 sensor	655×656×1030(mm) 25.8×25.8×40.5(inch)	Humidity	Humidity pan
CO2 range	544×504×681(mm) 21.4×19.8×26.8(inch)	Humidifying system	Standard
CO2 stability	185L/6.5cu.ft.	Humidifying sensor	≥95%

Product detail pictures:

Related Product Guide:

We know that we only thrive if we can easily guarantee our combined cost competiveness and high-quality advantageous at the same time for New Fashion Design for Pipette Controller - Water-Jacketed CO₂ Incubator – LuoRon , The product will supply to all over the world, such as: Mauritania, Kuala Lumpur, Nigeria, Merchandise have been exported to Asia, Mid-east,European and Germany market. Our company has constantly been able to update the items performance and safety to meet the markets and strive to be top A on stable quality and sincere service. If you have the honor to do business with our company. we'll undoubtedly do our very best to support your business in China.

Centrifuge Machine